Resource > Finishing Options (9 entries)
Here are some of the special finishes which are available.
For your eternal convenience, we’ve put together a repository of helpful tidbits relating to design and print. If you’re mystified by some printing jargon, this could be a good place to start.
Search the MakeReady Resource Centre for entries containing:
-
Water based coating applied on the printing press to protect and enhance the printed surface. An Aqueous coating drys instantly which allows post production processes to begin immediately, i.e. trimming, folding. ...
-
When folding it is often necessary to pre-crease the paper to reduce the possibility of the paper cracking, especially if there is a solid colour down the fold.
-
This involves cutting the sheet of paper or card to an irregular shape, using a specialised knife which needs to be formed for a particular job.
-
The pressing of an image so it lies above the surface of the paper. A special embossing "block" is used to impress the paper. Blind embossing is where you emboss the ...
-
This method of printing releases foil from its backing when stamped with a heated block. Also called block printing, or hot foil stamping. The result is generally a mirror-like finish, although ...
-
The application of a sheet of thin plastic over the paper to enhance durability. Available in matte or gloss. Can be applied prior to trimming or afterward for full encapsulation.
-
Perforating, or "perfing" creates a line of dotted holes for the purpose of creating a clean tear for vouchers, coupon books and the like. They are ususally straight although other shapes ...
-
Usually occurs on the press at the same time the page is being printed. Adding a gloss or matte seal prevents the ink from smudging and can improve the overall appearance. ...
-
This is the application of a varnish to a particular part of the sheet to give a glossy appearance to certain areas. Usually performed over matte laminated sheets to give more ...
